Product

+
  • 微信图片_20230327143330.jpg

6612

A Class-D normal voltage high efficiency power amplifier specifically designed for X- and Z-axis linear motors. The measured output drive voltage can reach 3.6V under 8Ω motor load, and the overall power efficiency is >92%. It supports SFDC sensorless F0 detection and calibration, which can measure and automatically track the motor self-oscillation frequency F0 in real time to overcome the F0 drift caused by the change of working environment and motor's own non-linearity, thus ensuring the drive and brake performance. The built-in waveform resynthesis function enables adaptive synthesis of new Haptic waveforms based on F0 detection results, eliminating the need for manual matching and synthesis. Support I2C broadcast mode and multi-channel dynamic mixing, multiple linear motors work together to achieve real-time multi-channel haptic scene rendering, bringing a richer scene experience. Support configurable auto-brake waveforms to meet customer's requirements for customized brake speeds.

key word:

6612

Product description:

  • Main parameter
  • Product characteristics
  • Function introduction
  • Application
    • Commodity name: 6612

    A Class-D normal voltage high efficiency power amplifier specifically designed for X- and Z-axis linear motors. The measured output drive voltage can reach 3.6V under 8Ω motor load, and the overall power efficiency is >92%. It supports SFDC sensorless F0 detection and calibration, which can measure and automatically track the motor self-oscillation frequency F0 in real time to overcome the F0 drift caused by the change of working environment and motor's own non-linearity, thus ensuring the drive and brake performance. The built-in waveform resynthesis function enables adaptive synthesis of new Haptic waveforms based on F0 detection results, eliminating the need for manual matching and synthesis. Support I2C broadcast mode and multi-channel dynamic mixing, multiple linear motors work together to achieve real-time multi-channel haptic scene rendering, bringing a richer scene experience. Support configurable auto-brake waveforms to meet customer's requirements for customized brake speeds.

      WLCSP 1.125mmx1.125mmx0.557mm

      IO level: >1.1V

      Standby current: ~ 3µA

      Shutdown current: < 0.3µA

      On-chip storage of up to 1000ms waveform data

      Maximum output voltage: 5.5V

      Voltage type: VBat

    Key words:
    • 6612
  •   On-chip integrated 6KB SRAM (supports up to 1000 ms on-chip waveform data)
      SFDC real-time non-inductive F0 detection and calibration algorithm
      On-chip waveform resynthesis
      On-chip phase glitch noise suppression filter
      Waveform adaptive auto-braking algorithm
      Full support for AAC RichTap® tool
      Multiple playback modes.
      i. Real-time playback (STREAM playback)
      ii. Built-in waveform, register-triggered playback (RAM playback)
      iii. Built-in waveform, GPIO pin-triggered playback
      iv. Configurable waveform, F0 auto-track drive playback
      Maximum drive output voltage 3.6V (Vbat 4.2 + 8Ω load)
      Input voltage range: 3.0 ~ 5.5V
      Overall power conversion efficiency > 92% (typical)
      Battery voltage detection and compensation
      1MHz/400KHz I²C interface
      Fast start-up time: 0.3ms
      Comprehensive protection mechanism
      i. Output short circuit protection
      ii. Battery over low voltage protection
      iii. Chip over-temperature protection
      WLCSP 1.125mmx1.125mmx0.557mm

  • A Class-D normal voltage high efficiency power amplifier specifically designed for X- and Z-axis linear motors. The measured output drive voltage can reach 3.6V under 8Ω motor load, and the overall power efficiency is >92%. It supports SFDC sensorless F0 detection and calibration, which can measure and automatically track the motor self-oscillation frequency F0 in real time to overcome the F0 drift caused by the change of working environment and motor's own non-linearity, thus ensuring the drive and brake performance. The built-in waveform resynthesis function enables adaptive synthesis of new Haptic waveforms based on F0 detection results, eliminating the need for manual matching and synthesis. Support I2C broadcast mode and multi-channel dynamic mixing, multiple linear motors work together to achieve real-time multi-channel haptic scene rendering, bringing a richer scene experience. Support configurable auto-brake waveforms to meet customer's requirements for customized brake speeds.

    111

    6612 Circuit Diagram

  • Phones and Tablets

      Wearable devices

      Handheld game consoles and gamepads

      Touchpads, ultra-thin keyboards, laptops

      Other devices that support haptic feedback

More products

Online Message

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible.

Shengsiwei (Shanghai) Technology Co., Ltd

Contact

img   021-50676696

img   Company E-mail ics@icsense.com.cn

img   Recruitment E-mail hr@icsense.com.cn

img   Business E-mail sales@icsense.com.cn

img   http://www.icsense.com.cn

img   Room 15A06, Block B, Hailiang Building, No. 12, Lane 118, Zhongjiang Road, Putuo District, Shanghai


Copyright: Shengsiwei (Shanghai) Technology Co., Ltd   Powered By: www.300.cn  SEO  Business license