2022-11-01

FD-SOI: the best choice for chip manufacturing process development to 10nm technology node


According to Moore's Law, the number of transistors a chip can hold doubles every two years. However, Moore's law is not just a technical matter of doubling the number of transistors on the same chip. Moore's law implies that as the chip integration density doubled, power consumption and performance will achieve substantial improvements. In the past 50 years, the semiconductor industry has been developed in accordance with Moore's law, because the three elements of the chip - price, power consumption and performance are always in linkage.

  In the foreseeable future, although the semiconductor industry can continue to prove the correctness of Moore's law, but when the development of today's advanced technology node below 28 nanometers, but encountered headwinds to block the pace of progress, because after 28 nanometers, the complexity of technology and manufacturing costs will be significantly increased. Taking into account the three elements of price, power consumption and performance, fully depleted silicon on insulator (FD-SOI) is the choice for chip manufacturing process development to the 10nm technology node.

  For chipmakers, end-product manufacturers and consumer electronics manufacturers, FD-SOI meets the requirements of the three elements of Moore's Law and is a market-proven solution, as the 28nm FD-SOI manufacturing process is now in volume production. ST is currently deploying 14nm FD-SOI technology, which is expected to be in volume production after 2015, while 10nm FD-SOI technology is still in the development phase.

  Cost is a decisive factor in whether any manufacturing process can deliver a return on investment. FD-SOI is a new technology and a slightly more expensive wafer than traditional bulk CMOS manufacturing processes, but the simpler structure makes it a cost-effective manufacturing process for technology nodes below 30nm. If a wafer is made using 28nm technology, FD-SOI requires 38 masks for the same options and metal layers, compared to up to 50 masks for some substrate CMOS. FD-SOI reduces the manufacturing process by 15% and the lead time by 10%, two advantages that can significantly reduce costs. In addition, the reduced number of masks and manufacturing processes help to improve product yields, thus further reducing costs.

  The advantages of FD-SOI over FinFET technology are even more pronounced, as FD-SOI is backward compatible with traditional, mature substrate CMOS processes. As a result, engineers can use existing development tools and design methodologies when developing next-generation products, and it is easy to convert existing 300mm wafer fabrication facilities into FD-SOI wafer production lines, as most of the equipment can be reused.

  Clearly, FD-SOI encounters little technical and cost resistance in Moore's Law-compliant manufacturing processes above the 10nm node. Consumer electronics manufacturers and other original equipment manufacturers have been influenced by Moore's Law for decades and expect semiconductor manufacturers to improve chip performance at the same price, and even better if the price is lower, unless the circumstances are exceptional, equipment manufacturers are unlikely to accept high prices. The crux of the matter is whether FD-SOI can deliver on its promise. In addition to price advantages, the use of advanced technology FD-SOI can also improve performance and power consumption to meet the needs of end users in different applications, such as consumer electronics, infrastructure, and even unimagined future applications.

  In addition to being "simpler," the robust transistor performance is an inherent advantage of FD-SOI, and the breakdown forward body bias (FBB) and wider voltage regulation range are additional features. Simply put, FBB and wider voltage regulation range can reduce power consumption when chip performance is fixed, or improve chip performance when power consumption is fixed. In fact, FBB in a transistor and then form a transistor, this tube within a tube technology only FD-SOI can be achieved, while FinFET can not do.

  FBB characteristics will bring great benefits to consumer electronics using FD-SOI system-on-a-chip, in an attempt to take full advantage of the frequency fixed components and high-performance components and different operating modes of application design, FD-SOI chip dynamic tuning function can make the performance and power consumption to achieve state.

  In the infrastructure sector, a data center uses more electricity than a medium-sized city. Analysts estimate that the combined power consumption of all data centers worldwide is equivalent to the power generated by 30 nuclear power plants [1], and FBB permits applications to dynamically tune the power consumption/leakage current/operating frequency according to the load of the data center. In this way, the energy consumption of the data center is proportional to the workload, and FD-SOI can reduce the power consumption of the data center by up to 50%.

  Power consumption, while important (especially in areas of infrastructure that consume a lot of power such as data centers), can only take second place to performance in the importance ranking. FD-SOI can also meet the high performance requirements of the market. 28nm substrate CMOS switching to 28nm FD-SOI results in circuit speed improvements of up to 35%. Even with the significant performance increase, FD-SOI transistors still have lower heat dissipation rates because of lower leakage currents and wider voltage regulation range and FBB improves chip energy efficiency, which allows end devices to dissipate less heat and last longer, significantly reducing overhead operating costs for power-hungry infrastructure such as data centers, for example, computer cooling expenses.

  Energy efficiency is also important for the emerging Internet of Things (IoT), which requires billions of smart sensors deployed around the world to monitor and track every object, and ensures that these sensors are always connected to the Internet. Considering the scale and potential of the IoT, up to billions of sensors operate energy-efficiently, ensuring high energy efficiency even when operating at low voltage, FD-SOI can meet the energy efficiency requirements of the IoT as a viable solution with high energy efficiency.

  Because ASICs and system-on-chips with FD-SOI have inherent advantages in terms of price, power and performance, ST has already secured 15 related design projects. As the ecosystem of foundries and IP partners expands in 2014, ST will win more design projects.

  A complete Moore's Law proof methodology

  The semiconductor industry is today able to foresee the 10nm node to prove the method of Moore's Law. To comply with Moore's Law requires a complete approach that leverages the price, power and performance advantages of the underlying manufacturing process. Therefore, FD-SOI is a natural alternative to substrate CMOS and will continue to create value for itself as well as for the sizeable global industrial ecosystem that relies on the chip.


Shengsiwei (Shanghai) Technology Co., Ltd

Contact

img   021-50676696

img   Company E-mail ics@icsense.com.cn

img   Recruitment E-mail hr@icsense.com.cn

img   Business E-mail sales@icsense.com.cn

img   http://www.icsense.com.cn

img   Room 15A06, Block B, Hailiang Building, No. 12, Lane 118, Zhongjiang Road, Putuo District, Shanghai


Copyright: Shengsiwei (Shanghai) Technology Co., Ltd   Powered By: www.300.cn  SEO  Business license