News
2022-11-01
Power semiconductors in 2016, SiC for fuel cell vehicles and Shinkansen
At the end of the year, Nikkei Techno Online publishes special features in each field that review the year's technology trends. In recent years, topics in the field of power semiconductors have been summarized, and this article introduces a little earlier what is relevant to the field in 2016.
First, the next-generation power semiconductor SiC (silicon carbide), for which Toyota announced in 2014 that it would begin on-road testing of trial vehicles (hybrids) with SiC power components in the drive system in 2015, and aim to use them in production vehicles by 2020 (see the report on this site). Thus, the expansion of SiC power components to in-vehicle use immediately takes on a realistic flavor.
Toyota is not alone in its focus on SiC. Honda and Nissan, among others, have also taken the application of SiC power components into their sights and have continued to develop them. Among them, Honda has equipped the fuel cell vehicle (FCV) "CLARITYFUELCELL", which was launched in March 2016, with SiC power elements, which are equipped in the company's production vehicles. In order to increase the output power of the motor even with a small fuel cell stack, the company boosted the output voltage of the fuel cell stack. This boost converter uses SiC power elements. The size of the fuel cell boost converter has been reduced by 40% compared to the original Si power element.
In the railroad field, which has long adopted SiC power elements, a major news was released in 2016. Tokai Railway (JR Tokai) announced that it will adopt SiC power components for the next-generation Shinkansen, the N700S, to be operated by the Tokaido Shinkansen from fiscal 2020 (see the story on this site), with the aim of achieving a smaller and lighter drive system. For example, the weight of the motor control unit "CI (ConverterInverter)" has been reduced to about 2/3 of that of the existing N700S.
Solving the perennial problem of new materials
In addition to SiC, the development of "gallium oxide" (Ga2O3) also made progress in 2016. Compared with SiC and GaN, GaO can produce high withstand voltage and low loss power components at a lower cost, so it has attracted much attention in recent years. However, GaO previously had the subject of difficult to achieve p-type layers. A research group of FLOSFIA and Kyoto University (including Professor Shizuo Fujita and Assistant Professor Kentaro Kaneko of the Graduate School of Engineering) has opened the way to solve this "long-standing problem" (see the report on this site).
The group is working on "α-type" gallium oxide with a "corundum-type" crystal structure. The p-type layer was realized by using iridium oxide (Ir2O3), which has the same corundum-type structure as α-type gallium oxide. In this way, n-type gallium oxide and p-type iridium oxide can be used to produce power MOSFETs.
Real-time news
Professional haptic driver control chip and system solution provider
Contact
021-50676696
Company E-mail ics@icsense.com.cn
Recruitment E-mail hr@icsense.com.cn
Business E-mail sales@icsense.com.cn
http://www.icsense.com.cn
Room 15A06, Block B, Hailiang Building, No. 12, Lane 118, Zhongjiang Road, Putuo District, Shanghai
Copyright: Shengsiwei (Shanghai) Technology Co., Ltd Powered By: www.300.cn SEO Business license
Language